En877/ISO6594/ASTM-A888 Cast Iron Pipe for Dainage System

• Customization: Available
• Type: Cast Iron Pipes
• Joint Type: Flexible Joint
• Model NO.: DN50-300
• Section Shape: Round
• Certification: En877, ISO6594, ASTM-A888, Ksd4307
• Shape: Round
• Customized: Customized
• Gasket Material: EPDM
• Material: Cast Iron
• Connection Method: Flexible Joint with Stainless Steel Couplings
• DN: 50-300mm
• Manufacturing Chart: Centrifugal Casting
• Length: 3m/PC
• Internal Coating: Epoxy or Coking Bituminous 120 Micrometers up
• External Coating: Epoxy or Paint 40 Micrometers up
• Transport Package: in Pallets or Bulk
• Specification: DN50-300
• Trademark: OEM
• Origin: Shandong, China
• HS Code: 73030010
• Production Capacity: 800mts/Month

Product Description

Brief introduction:
This product is widely used in building drainage system because of it's excellent performance in noise suppression, fire resistance, low thermal expansion and chemical resistance. At the same time, it is solid and durable and easy to install. Drainage system include socketless centrifugal cast iron pipe, socketless fittings, joints and sealing ring.

Manufacturing method:   centrifugal casting.

Product advantages:
1.    Durability with long time service life
2.    Inflammable, free from toxic matter
3.    Anti-corrosion and resistance to aging
4.    Lower expansion and contraction
5.    Lower noise
6.    Aseismatic because of it's flexible and high tolerant body
7.    Anti-leakage and seep
8.    Easy to be installed
9.    Good design and appearance

Pipe sizes:

 Unit: mm      Pipe length: 3000 + 20mm

Specification	d Outside diameter		S Wall thickness		Weight/PC KGS	Packing Pcs/pallet
	Size	Tolerance	Size	Min
40	48	+2 -1	3.0	2.5	9.4	68
50	58		3.5	3.0	13	50
70	78		3.5	3.0	17.7	50
75	83		3.5	3.0	18.9	46
100	110		3.5	3.0	25.2	34/38
125	135	+2 -2	4.0	3.5	35.4	20
150	160		4.0	3.5	42.2	17
200	210	+2.5 -2.5	5.0	4.0	69.3	10
250	274		5.5	4.5	99.8	8
300	326		6.0	5.0	129.7	6

Internal coating and it's performance:
-- Material of coating: epoxy or coking bituminous
-- Thickness of coating: 120 microns
-- Resistance to salt solution(5%): no change under normal temperature within 30 days
-- Resistance to chemicals: no change in water (PH2-12) at 23ºC within 30 days
-- Resistance to temperature: no change in 95ºC water within 24 hours
-- Resistance to cold and hot water cycle: 1500 times  at 15ºC-93ºC switch

External coating and it's performance:
-- Material: epoxy or red painting
-- Thickness of dry paint film: 40 microns up
-- Thickness of coating: 40 microns up
-- Adhesion: comply to ISO2409 Grade 2
-- Resistance to fire: inflammable

Hydrostatic  pressure test:

Product Name	Diameter       mm	Max testing pressure            Mpa	Normal testing pressure            Mpa
Centrifugal drainage pipe	50-200	0.8	0.42
Centrifugal drainage pipe	> 200	0.5	0.42

 
Mechanical & Chemical analysis:

Tensile strength	≥ 180Mpa
Brinell hardness	≤ 260HB
Force test	No leakage in 5 minutes under stable pressure
Ring crush test	≥ 380Mpa
Thermal expansion	0.0105mm / mk  (0ºC-100ºC)
Heat conductivity rate	50-60w / mk (20ºC)
No deformation of pipe with foreign heat under temperature 400ºC
No corrosion of pipe because of medium with PH value 2-12
Chemical analysis	S ≤ 0.1     P ≤ 0.3   C:3.3-3.8    Si: 2.2-2.7   Mn: 0.4-0.7

Note:
1.  Free from impact during delivery and installation.
2.  Protect inner and outer coatings against sharp articles.
3.  Check whether there is block in pipe and fittings before installation,
      If there is, clear it firstly.
4.  Joints like clamp should guarantee no shape cracking, thread damage and gasket damage.



About US: